Predefinição:Info/Munição

Origem: Wikipédia, a enciclopédia livre.
Ir para: navegação, pesquisa


Ícone de documentação Documentação da predefinição[ver] [editar] [histórico] [purgar]
Translation Latin Alphabet.svg Esta página ou secção está a ser traduzida. Ajude e colabore com a tradução.

Descrição[editar | editar código-fonte]

A infobox munição de arma de fogo ({{Info/Munição}}) pode ser utilizada para resumir informações sobre um determinado cartucho ou projétil de artilharia. A infobox deve ser adicionada usando o template {{Info/Munição}}, como mostrado abaixo:

Uso[editar | editar código-fonte]

.357 SIG
9mm 7,62mm 357sig 10mm 45SW 45GAP 50AE 002.jpg
Comparação com outros cartuchos. .357 SIG terceiro da esquerda.
Tipo Pistola
Local de origem  Estados Unidos
Histórico de produção
Criador SIGARMS / Federal Cartridge Co.
Data de criação 1994
Especificações
Cartucho tipo Rimless, bottleneck
Diâmetro do Projétil ,355 in (9,02 mm)
Diâmetro do pescoço ,381 in (9,68 mm)
Diâmetro do ombro ,424 in (10,8 mm)
Diâmetro da base ,424 in (10,8 mm)
Diâmetro do aro ,424 in (10,8 mm)
Espessura do aro ,055 in (1,40 mm)
Comprimento do cartucho ,865 in (22,0 mm)
Comprimento total 1,14 in (29,0 mm)
Primer Pistola pequena
Desempenho balístico
Projétil Peso / Tipo Velocidade Energia
115 BHP 1564 624
124 JHP 1329 486
125 JHP 1299 468
147 JHP 1186 459
150 JHP 1130 425
Comprimento do tubo de teste: 4 in
Referências: Steve's 357 SIG Ballistic Page


{{Info/Munição
<!-------Nome, imagem, tipo, origem---------->
| nome            = 
| imagem          = 
| legenda         = 
| tipo            = 
| origem          = Por Exemplo: {{USA}}
| serviço         = 
| usado_por       = 
| guerras         = 
<!----------Histórico de produção------------>
| criador         = 
| data_da_criaçao = 
| fabricante      = 
|data_de_produçao = 
| quantidade      = 
| variantes       = 
<!-------------Especificações---------------->
| semelhante      = 
| cartucho_tipo   = 
|diametro_projétil= 
|diametro_pescoço = 
| diametro_ombro  = 
| diametro_base   = 
| diametro_aro    = 
| espessura_aro   = 
| comp_cartucho   = 
| comprimento     = 
| capacidade_cart = 
| raiamento       = 
| primer          = 
| pressao_max     = 
| max_cup         = 
| preenchimento   = 
| peso_enchimento = 
| detonação       = 
| rendimento      = 
<!-----------Desempenho balístico------------>
| bw1             = 
| btype1          = 
| vel1            = 
| en1             = 
| bw2             = 
| btype2          = 
| vel2            = 
| en2             = 
| bw3             = 
| btype3          = 
| vel3            = 
| en3             = 
| bw4             = 
| btype4          = 
| vel4            = 
| en4             = 
| bw5             = 
| btype5          = 
| vel5            = 
| en5             = 
|comprimento_tubo = 
| balref          = 
}}

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).

General parameters:

  • name – the formal name of the cartridge.
  • imageoptional – an image of the cartridge. The image must be given in the form [[Image:Example.jpg|300px]]; in particular, the thumb attribute must not be selected.
  • captionoptional – the text to be placed below the image.
  • origin – the country or place where the cartridgeoriginated or was first manufactured.
  • type – the type of cartrige or its designed use (e.g. "Pistol", "Rifle", "Hunting", etc.).

Service history parameters:

  • serviceoptional – the period (usually given in years) when the cartridge was in service.
  • used_byoptional – the countries, armed forces, or other groups using the cartridge; this may be omitted for cartridges employed only in their country of origin.
  • warsoptional – any wars during which the cartridge saw service.

Production history parameters:

  • designeroptional – the person or group responsible for designing the cartridge.
  • design_dateoptional – the date (usually given as a year) when the cartridge was designed.
  • manufactureroptional – the manufacturer of the cartridge.
  • production_dateoptional – the period (usually given in years) when the cartridge was produced.
  • numberoptional – the number of cartridge of this type that were manufactured.
  • variantsoptional – any variant models of the cartridge.

Specification parameters:

  • is_SI_specsoptional – "yes" if the specifications are entered in SI units; any other value causes it to be interpreted as English units.
  • parentoptional – the cartridge that the cartridge was based on, if any.
  • case_typeoptional – the type of case used for the cartridge (e.g. rimmed, rimless, straight, bottlenecked, etc.).
  • bulletoptional – the diameter of the bullet used in the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
  • neckoptional – the neck diameter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
  • shoulderoptional – the shoulder diameter of the cartridge, if any, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
  • baseoptional – the base diameter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
  • rim_diaoptional – the rim diamter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
  • rim_thickoptional – the rim thickness of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
  • case_lengthoptional – the case length of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
  • lengthoptional – the overall length of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
  • case_capacityoptional – the volume of the casing, expressed in cm³ or grains of water; only include the number, and not the units of measurement, and omit any commas.
  • riflingoptional – typical rifling to stablize the bullet fired from the cartridge.
  • primeroptional – the type of primer used in the cartridge (e.g. large pistol, small rifle, rimfire, etc.).
  • max_pressureoptional – the maximum chamber pressure of the round, expressed in MPa or psi; only include the number, and not the units of measurement, and omit any commas.
  • max_cupoptional – the maximum chamber pressure of the round, expressed in CUP; only include the number, and not the units of measurement, and omit any commas. Note that this parameter is not affected by the is_SI_specs parameter.
  • fillingoptional – the explosive filling material of the shell, if any.
  • filling_weightoptional – the weight of the explosive material of the shell, if any.
  • detonationoptional – for explosive shells, the detonation trigger type (e.g. "timer", "pressure", "motion sensor").
  • yieldoptional – for explosive shells, the yield (in tons of TNT) of the device.

Ballistic performance parameters:

Ballistic data for up to five different weight bullets can be specified; it may be provided in either SI or English units, but this choice must be consistent for all five sets. The x in the field name should be replaced with 1–5 as displayed in the template format shown above (e.g. bw1, bw2, btype1, btype2, vel1, vel2, en1, en2, etc.):

  • is_SI_ballisticsoptional – "yes" if the energy and velocity ballistics data is entered in SI units; any other value causes it to be interpreted as English units.
  • bwunitoptional – "gram" if the weights are given in grams; any other value causes them to be interpreted as grains.
  • bwxoptional – the weight of the bullet for given data, expressed in grams or grains; only include the number, and not the units of measurement.
    • btypexoptional – the type of bullet (e.g. JHP, FMJ, BHP, ect.).
    • velxrequired if bw field is specified – velocity of the bullet at the muzzle, expressed in m/s or ft/s; only include the number, and not the units of measurement, and omit any commas.
    • enxrequired if bw field is specified – energy of the bullet at the muzzle, expressed in J or ft·lbf; only include the number, and not the units of measurement, and omit any commas.
  • test_barrel_lengthoptional – the length of the barrel used when generating the ballistics data.
  • balsrcoptional – the source from which the ballistics data was obtained.

Ver também[editar | editar código-fonte]

{{Info/Arma}} - A infobox Info/Arma pode ser utilizada para resumir as informações sobre uma determinada arma ou sistema de armas.