Ficheiro:Ball and socket ground glass joints.svg

O conteúdo da página não é suportado noutras línguas.
Origem: Wikipédia, a enciclopédia livre.

Imagem numa resolução maior(ficheiro SVG, de 425 × 105 píxeis, tamanho: 1 kB)

Descrição do ficheiro

Descrição
English: Drawing of ground glass ball and socket joints used for making laboratory glassware. A ball (inner) joint is shown on the left side and a socket (outer) joint is shown on the right side. The ground glass surfaces are shown with gray shading. By putting them together in the direction of the arrows, they can be joined, usually with a little grease spread on the ground glass surfaces. They are typically held together by a clamp. The ball joint goes in the socket joint to join attached tubular sections of glass together. H Padleckas created this image file in April 2006 especially for use in the article "Laboratory glassware" in Wikimedia. H Padleckas 13:29, 27 May 2006 (UTC)
Data 27 May 2006 (original upload date), 2019-04-15 (vectorized)
Origem File:Ball_and_socket_ground_glass_joints.PNG, vectorized by GKFXtalk.
Autor H Padleckas, vectorized by GKFXtalk
Permissão
(Reutilizar este ficheiro)
Eu, titular dos direitos de autor desta obra, publico-a com as seguintes licenças:
GNU head É concedida permissão para copiar, distribuir e/ou modificar este documento nos termos da Licença de Documentação Livre GNU, versão 1.2 ou qualquer versão posterior publicada pela Free Software Foundation; sem Secções Invariantes, sem textos de Capa e sem textos de Contra-Capa. É incluída uma cópia da licença na secção intitulada GNU Free Documentation License.
w:pt:Creative Commons
atribuição partilha nos termos da mesma licença
A utilização deste ficheiro é regulada nos termos da licença Creative Commons - Atribuição-CompartilhaIgual 3.0 Não Adaptada.
Pode:
  • partilhar – copiar, distribuir e transmitir a obra
  • recombinar – criar obras derivadas
De acordo com as seguintes condições:
  • atribuição – Tem de fazer a devida atribuição da autoria, fornecer uma hiperligação para a licença e indicar se foram feitas alterações. Pode fazê-lo de qualquer forma razoável, mas não de forma a sugerir que o licenciador o apoia ou subscreve o seu uso da obra.
  • partilha nos termos da mesma licença – Se remisturar, transformar ou ampliar o conteúdo, tem de distribuir as suas contribuições com a mesma licença ou uma licença compatível com a original.
Esta marca de licenciamento foi adicionada a este ficheiro durante a atualização da licença GFDL.
Pode escolher a licença que quiser.
Outras versões

Legendas

Adicione uma explicação de uma linha do que este ficheiro representa

Elementos retratados neste ficheiro

retrata

image/svg+xml

023292913cbbd3b529c91928c37ad68a7b230850

105 pixel

425 pixel

Histórico do ficheiro

Clique uma data e hora para ver o ficheiro tal como ele se encontrava nessa altura.

Data e horaMiniaturaDimensõesUtilizadorComentário
atual12h41min de 15 de abril de 2019Miniatura da versão das 12h41min de 15 de abril de 2019425 × 105 (1 kB)GKFX{{Information |description ={{en|1=Drawing of ground glass ball and socket joints used for making laboratory glassware. A ball (inner) joint is shown on the left side and a socket (outer) joint is shown on the right side. The ground glass surfaces are shown with gray shading. By putting them together in the direction of the arrows, they can be joined, usually with a little grease spread on the ground glass surfaces. They are typically held together by a clamp. The ball joint goes in the soc...

A seguinte página usa este ficheiro:

Utilização global do ficheiro

As seguintes wikis usam este ficheiro:

Metadados