Ficheiro:Steam turbines; a practical and theoretical treatise for engineers and students, including a discussion of the gas turbine (1917) (14779694074).jpg
O conteúdo da página não é suportado noutras línguas.
Para usar esta imagem numa página da Wikipédia inserir: [[Imagem:Steam turbines; a practical and theoretical treatise for engineers and students, including a discussion of the gas turbine (1917) (14779694074).jpg|thumb|180px|Legenda]]
Descrição do ficheiro
DescriçãoSteam turbines; a practical and theoretical treatise for engineers and students, including a discussion of the gas turbine (1917) (14779694074).jpg
Text Appearing Before Image: on, and is deflected radi-ally by the two sets of buckets a and c on the wheel. Steamenters the nozzles from the steam chest S. Relative positions ofnozzles and buckets are illustrated diagrammatically in Fig. 156.Actually in the turbine the horizontal lines in this figure are, ofcourse, arcs of circles. The steps shown here in the wall ofthe bucket ring are intended to bring the surfaces upon whichthe steam impinges nearer to the nozzles and to present alwaysapproximately the same angle to the flow of steam. The nozzles are designed with the object of delivering the steamto the buckets in parallel jets. Throughout their lengths thenozzle walls are the same distance apart, and expansion is securedby the use of expansion wedges, shown plainly in both figures,which are set centrally in the nozzles. These wedges can bereadily removed and replaced, so that it is not difficult to inserta wedge properly proportioned to give the best expansion for agiven steam pressure. 270 THE STEAM TURBINE Text Appearing After Image: W>^ M O a GO COMMERCIAL TYPES 271 SPIRO TURBINES.*The Spiro turbine (Fig. 157) consists simply of two herringbonegear wheels which mesh together and revolve in a close-fittingcasing. Steam enters at the inlet pipe at the bottom and passesaround the gears in its expansion to the exhaust pipe at the top.Steam discharges from the inlet pipe through the small holes,equivalent to non-expanding nozzles shown in Figs. 158 and 159,into the pockets or spaces between adjacent gear teeth. As
Note About Images
Please note that these images are extracted from scanned page images that may have been digitally enhanced for readability - coloration and appearance of these illustrations may not perfectly resemble the original work.
Remova as categorias redundantes e tente colocar a imagem em categorias o mais específicas possível.
Remova esta predefinição clicando aqui (ou na primeira linha).
Licenciamento
Esta imagem foi extraída do projeto The Commons no Flickr. A organização que a carregou pode ter várias razões para determinar que não existem restrições conhecidas devidas a direitos de autor, tais como:
A obra está no domínio público porque o direito de autor expirou.
A obra caiu no domínio público por outras razões, como falha de cumprimento de formalidades e condições necessárias.
A instituição detém o direito de autor mas não está interessada em exercer o seu controlo.
A instituição tem direitos legais suficientes para autorizar que outros usem a obra sem restrições.
Se lhe for possível apurar informações mais específicas sobre o estado do direito de autor, acrescente marcações de direito de autor a esta imagem, por favor. Para mais informações, consulte Commons:Licenciamento.
No known copyright restrictionsNo restrictionshttps://www.flickr.com/commons/usage/false
Esta imagem foi originalmente carregada no Flickr por Internet Archive Book Images em https://flickr.com/photos/126377022@N07/14779694074. Ela foi revisada em 31 de agosto de 2015 pelo robô FlickreviewR, que confirmou o licenciamento da imagem sob os termos de No known copyright restrictions.
31 de agosto de 2015
Legendas
Adicione uma explicação de uma linha do que este ficheiro representa