Andreas Oechsner

Andreas Öchsner
Nascimento	19 de outubro de 1970 (53 anos) Blieskastel
Nacionalidade	alemão
Cidadania	Alemanha
Alma mater	Universidade de Stuttgart, Universidade de Erlangen-Nuremberg, Universidade de Newcastle
Ocupação	materials engineer, professor
Empregador(a)	Universidade de Erlangen-Nuremberga, Griffith University - Gold Coast Campus
Instituições	Universidade de Erlangen-Nuremberg, Universidade de Aveiro, Universidade de Newcastle, Universidade Griffith
Campo(s)	engenharia mecânica
Página oficial
https://www.griffith.edu.au/engineering-information-technology/griffith-school-engineering/staff/professor-andreas-Ochsner
[edite no Wikidata]

Andreas Öchsner (Blieskastel, 19 de outubro de 1970) é um engenheiro mecânico alemão. É professor da Universidade Griffith, Queensland, Austrália.

Formação

• M.Sc. - Universidade de Stuttgart, 1997
• Ph.D. - Universidade de Erlangen-Nuremberg, 2003
• D.Sc. - Universidade de Newcastle, 2010

Livros

1. A. Öchsner: Experimentelle und numerische Untersuchung des elasto-plastischen Verhaltens zellularer Modellwerkstoffe [Experimental and Numerical Investigations of the Elastic Plastic Properties of Model Cellular Materials] (140 pages). Düsseldorf: VDI Verlag 2003.
2. M. Merkel, A. Öchsner: Eindimensionale Finite Elemente – Ein Einstieg in die Methode [One-Dimensional Finite Elements: An Introduction into the Method] (422 pages). Berlin: Springer Verlag 2010.
3. M. Gromada, G. Mishuris, A. Öchsner: Correction Formulae for the Stress Distribution in Round Tensile Specimens at Neck Presence (89 pages). SpringerBriefs in Applied Sciences and Technology (Computational Mechanics). Berlin: Springer Verlag 2011.
4. A. Öchsner, M. Merkel: One-Dimensional Finite Elements – An Introduction to the FE Method (398 pages). Berlin: Springer Verlag 2013.
5. A. Öchsner: Introduction to Scientific Publishing – Backgrounds, Concepts, Strategies (96 pages). SpringerBriefs in Applied Sciences and Technology. Heidelberg: Springer Verlag 2013.
6. A. Öchsner: Elasto-Plasticity of Frame Structure Elements – Modeling and Simulation of Rods and Beams (596 pages). Berlin: Springer Verlag 2014.
7. S.I. Yengejeh, S.A. Kazemi, A. Öchsner: A Primer on the Geometry of Carbon Nanotubes and their Modifications (70 pages). Cham: Springer Verlag 2015.
8. H.R. Rezaie, L. Bakhtiari, A. Öchsner: Biomaterials and Their Applications (49 pages). Cham: Springer Verlag 2015.
9. M. Merkel, A. Öchsner: Eindimensionale Finite Elemente – Ein Einstieg in die Methode [One-Dimensional Finite Elements: An Introduction into the Method], 2nd edition (428 pages). Berlin: Springer Vieweg Verlag 2015.
10. M. Öchsner, A. Öchsner: Das Textverarbeitungssystem LaTeX: Eine praktische Einführung in die Erstellung wissenschaftlicher Dokumente [The text processing system LaTeX: A practical introduction into the preparation of scientific documents]. Wiesbaden: Springer Vieweg 2015.
11. F.A. Nasruddin, M.N. Harun, A. Syahrom, M.R.A. Kadir, A.H. Omar, A. Öchsner: Finite Element Analysis on Badminton Racket Design Parameters (47 pages). SpringerBriefs in Applied Sciences and Technology (Computational Mechanics). Cham: Springer 2016.
12. A. Öchsner: Continuum Damage and Fracture Mechanics (163 pages). Singapore: Springer 2016.
13. A. Öchsner: Computational Statics and Dynamics – An Introduction Based on the Finite Element Method (485 pages). Singapore: Springer 2016.
14. A. Öchsner, M. Öchsner: The Finite Element Analysis Program MSC Marc/Mentat (136 pages). Singapore: Springer 2016.
15. A. Öchsner: Theorie der Balkenbiegung: Einführung und Modellierung der statischen Verformung und Beanspruchung [Theory of Beam Bending: Introduction and Modeling of the Static Deformation and Loading] (44 pages). Wiesbaden: Springer Vieweg 2016.

Monografias

1. A. Öchsner, G.E. Murch, M.J.S. de Lemos (Eds.): Cellular and Porous Materials - Thermal Properties Simulation and Prediction (422 pages). Weinheim, Germany: Wiley-VCH 2008.
2. W. Ahmed, N. Ali, A. Öchsner (Eds.): Biomaterials and Biomedical Engineering (555 pages). Stafa-Zurich, Switzerland: Trans Tech Publications Ltd, 2008.
3. L.F.M. da Silva, A. Öchsner (Eds.): Modeling of Adhesively Bonded Joints (335 pages). Berlin, Germany: Springer 2008.
4. A. Öchsner, W. Ahmed and N. Ali (Eds.): Nanocomposite Coatings and Nanocomposite Materials (402 pages). Stafa-Zurich, Switzerland: Trans Tech Publications Ltd, 2009.
5. A. Öchsner, C. Augustin (Eds.): Multifunctional Metallic Hollow Sphere Structures (258 pages). Berlin, Germany: Springer 2009.
6. N. Ali, A. Öchsner, W. Ahmed (Eds.): Carbon Based Nanomaterials (322 pages). Stafa-Zurich, Switzerland: Trans Tech Publications Ltd, 2010.
7. H. Altenbach, A. Öchsner (Eds.): Cellular and Porous Materials in Structures and Processes, CISM Courses and Lectures Vol. 521 (334 pages). Wien, Austria: Springer 2010.
8. A. Öchsner, W. Ahmed (Eds.): Biomechanics of Hard Tissues (306 pages). Weinheim, Germany: Wiley-VCH 2010.
9. L.F.M. da Silva, A. Pirondi, A. Öchsner (Eds.): Hybrid Adhesive Joints (309 pages). Berlin, Germany: Springer 2011.
10. L.F.M. da Silva, A. Öchsner, R.D. Adams (Eds.): Handbook of Adhesion Technology (1548 pages in two volumes). Berlin, Germany: Springer 2011.
11. A. Öchsner, G.E. Murch (Eds.): Heat Transfer in Multi-Phase Materials (460 pages). Berlin, Germany: Springer 2011.
12. A. Öchsner, A. Shokuhfar (Eds.): New Frontiers of Nanoparticles and Nanocomposite Materials (371 pages). Berlin, Germany: Springer 2013.
13. H. Altenbach, A.Öchsner (Eds.): Plasticity of Pressure-Sensitive Materials (376 pages). Berlin, Germany: Springer 2014

Conferências

1. Chair of International Conference on Advanced Computational Engineering and Experimenting, ACE-X (since 2006)
2. Chair of International Conference on Diffusion in Solids and Liquids - DSL (since 2004)